Construction & DIY

• 70L / 2.4 cubic feet capacity - largest in class!
• Full commercial specification - site ready
• Easy-load drum design
• Powerful 220W motor
• Ultra tough heavy duty frame
• Reliable no-jam gearing
• Balanced easy-tipping mechanism
• High grade tipper lock
• Full 12 months warranty

• Huge 210L / 7.41 cubic feet capacity - Largest among competitors!
• Full commercial specification - site ready
• Easy-load drum design
• Powerful 800W motor
• Ultra tough heavy duty frame
• Reliable no-jam gearing
• Balanced easy-tipping mechanism
• High grade tipper lock
• Full 12 months warranty

• Quick clear nose
• Rubber driver tip
• Strong Lightweight aluminium die-cast body
• Accepts nails 32mm-64mm
• High powered large piston
• Rubber handle grip
• Touch-point safety mechanism
• Nail reload window for avoiding blank drives
• Multi-directional 360° exhaust port
• Quick hose attach system to standard NPT fitting
• BONUS high-impact carrying case, oil for lubrication

• Rubber nose for surface protection
• Accepts nails 50mm - 90mm
• High powered large piston
• Rubber handle grip
• Touch-point safety mechanism
• Nail reload window for avoiding blank drives
• Multi-directional 360° exhaust port
• Quick hose attach system to standard NPT fitting
• BONUS high-impact carrying case, oil for lubrication

    Applications

• Framing
• Wall Sheathing
• Roof Sheathing
• Floor Decking

• The genuine Baumr-AG pro-series
• Huge torque - 50 joules / 1500bpm
• Full 3.5hp force (most powerful on the market)
• Accurate thumb throttle control
• Baumr's famous series II Vibe-FlexTM rubber hand grip
• High tensile gear set for maximum reliability
• Toughened crankshaft, ball bearing construction
• BONUS! Moil point chisel
• Requires very little maintenance
• Suitable for working on site without power or in wet conditions
• 12-month warranty

• Universally Suitable for Drilling, Tapping, Reaming Countersinking
• Powerful 13000N Switchable Magnetic Adhesion
• Optimised rotation speed (350rpm) for clean and precise cuts
• BONUS Drill Chuck for No Fuss Traditional Drilling
• MT2 Morse Taper suits all Common Sizes
• Ultra-Portable Lightweight
• Exceeds AS/NZS standards
• Full 12 months warranty

• Genuine Unimac Sander Bag
• Combination of Plastic Fibres
• Secured with reinforced handles
• 135cm in length
• Reliable solid plastic zip
• Waterproof
• Compatible with DW-SMALL

• 2000W Motor Design for Serious Suction Power
• Durable Stainless Steel Tank
• Dual Blower and Vacuum Functions
• Conveniently Fit Attachments to the Base
• Dual Function Base for Carpet and Hard Floors
• Complete Set of Attachments
• Superior Manoevrability- Handle and 4 Wheels
• Washable Ultra-Fine Filter
• Balanced Top Handle Design
• Convenient and Easy to Access Quick Release Removable Tank

• Tough yet Lightweight Stainless Steel
• Tilt or Remove Tank Emptying System
• Triple Motor for 3000W of Serious Suction

• 2000W Motor Design for Serious Suction Power
• Durable Stainless Steel Tank
• Clever Tilt or Remove Tank Emptying System
• DualFunction Base for Carpet and Hard Floors
• Complete Set of Attachments
• Superior Manoevrability- Handle, Oversized Rear Wheels and Front Casters
• Washable Ultra-Fine Filter
• Handy Quick Drainage Pipes for those Tough Jobs
• Balanced Top Handle Design
• Convenient and Easy to Access Quick Release Removable Tank

• Powerful 1500W High-torque motor
• Rugged Heavy-gauge steel construction
• Single worker can load and unload
• Large capacity (100 Litres)
• Smooth non-stick tub coating
• Integrated bag ripping bar
• Automatic safety cut-off
• Fold-down platform for unloading to buckets
• 240V Single-phase operation

• 7HP engine
• Large 12 litre on-board wetting down tank
• 350mm diameter blade
• "On the Fly" adjustable cutting depth
• Optimised weight distribution
• Convenient line guide
• Fully rigid frame design with lifting point
• CoatGuard^TM finished frame for easy cleaning
• Full commercial specification with self-centering bearings

• Genuine WARTON 8HP High Flow Petrol Water Pump - Finally a Quality Pumping Solution is Available
• Class Leading Flow Rate of 40000 Litres/hour (666L/min)
• Efficient Single-Stage Centrifugal Operation
• Anti-Corrosive alloy pump housing, Ceramic and carbon seals
• Full 80mm (3”) Inlet / Outlet 
• Solid Impeller for durability, Gearless direct drive
• Low maintenance, low oil alert system
• 100% Duty cycle- Designed for continuous operation
• Ideal for Residential/Commercial Use

• Genuine Warton 8.0HP High Pressure Petrol Water Pump - Finally a Quality Pumping Solution is Available
• Class Leading Flow Rate of 30,000Litres/Hour
• Serious Pressure with a Huge 140m Head
• Anti-Corrosive alloy pump housing, Ceramic and carbon seals
• Full 40mm (1.5") Inlet / Outlet 1x40mm (1.5”) & 2x25mm (1.0”) 
• Solid impeller for durability, Gearless direct drive
• Low maintenance, Low oil alert system
• Ideal for Residential/Commercial Use

• Innovative 2-in1 cordless tool
• Compatible with 18 ga 15-50 mm brad nails and 10-40 mm staples
• Suitable for a wide range of fastening applications
• Powerful 20V lithium-ion battery
• Quick release stainless steel magazine
• 100 fastener capacity
• 60 nails/staples per minute
• Depth-of-drive adjustor
• No-Mar contact tip
• Innovative anti-dry fire system
• Magazine viewing window
• LED warning light:  Alerts - no fasteners, jammed fasteners, low battery
• 2 x LED work lights
• Single and contact fire functions
• Belt clip
• Soft-grip handle
• LED light switch
• Ergonomic and practical design
• BONUS carry case, 20V lithium battery, charger, spare No-Mar contact tip, 200 brad nails, 200 staples

• Genuine Warton 8HP High Flow Petrol Water Pump
• Class Leading Flow Rate of 30,000 Litres/h (500L/min)
• Efficient Single-Stage Centrifugal Operation 
• Anti-Corrosive alloy pump housing, Ceramic and carbon seals
• Full 50mm (2”) Inlet / Outlet 
• Solid impeller for durability, Gearless direct drive 
• Low maintenance, Low oil alert system
• 100% Duty Cycle- Designed for continuous operation
• Ideal for Residential/Commercial Use    

• The Genuine Powerblade commercial series with e-Start
• Big 75cc long rod engine - plenty of power to get the job done fast
• Patented Gen III E-Start - no troublesome decompression valve
• Fully adjustable blade guard - for maximum protection
• Dual mass patented "A-VIBE" Anti Vibration system
• Twin stage air filtration system - with easy cleaning
• BONUS Wet cutting attachment - reduces RCS and other airborne dust
• 14" Premium Blu-Series diamond blade RRP $180

• Legendary UNIMAC quality
• 2-in-1 Fires 18Ga. brad and finish nails plus narrow crown staples
• Tough build quality yet lightweight at 1.46kg
• Aluminum magazine with quick-release for fast loading
• Soft-grip rubber handle for comfortable non-slip usage
• Touch-point safety mechanism
• Nail reload window for avoiding blank drives
• Multi-directional 360° exhaust port
• Quick hose attach system to standard NPT fitting
• BONUS high-impact carrying case, oil for lubrication, safety goggles

Applications

• Upholstery
• Window frames
• Plasterboard
• Light DIY work

• Rugged, balanced solid cast metal body
• Up to 300 collated nails ranging between 32-65mm
• Perfect workmate for your building, decking and fencing jobs!
• Extremely tough heat-treated one-piece hardened steel drive blade
• Soft-grip rubber handle allows for comfortable non-slip use
• Quick hose attach system to standard NPT fitting
• Adjustable depth control
• Touch-point safety mechanism prevents accidental firing
• Multi-directional 360° exhaust port
• Compatible with both wire and plastic collated nails
• Replacement Nail coils available in general hardware stores
• Quick release nosepiece for those rare instances of a jam occurring
• BONUS high-impact carrying case, with safety goggles & oil
• BONUS coil of 50mm nails 

• Genuine Commercial Duty Tradesmen Tool
• Massive Torque Output
• Ergonomic Balanced Design - Great for Prolonged use
• Adjustable On-the-fly Working Pressure
• Reversible - Fasten and Remove
• 10 Quality Impact Sockets Included
• Suitable for Wheel Fitting, Engine Disassembly and Gearbox Removal

• Superior UNIMAC quality
• 100% compatible with framing nails
• Full Sequential Actuation for maximum speed
• Outstanding performance on frame work
• Unparalleled quality
• Up to 1000 cycles an hour
• 3000 shots per charge
• Long lasting nail capacity
• Triple press-hardened drive blade
• Incorporated tool belt latch
• Comfortable elastomer grip handle
• Includes 2 li-ion batteries, charger pack, and bonus glasses
• Bonus carry case

• Genuine ROSSI Quality!
• 20 - 200 Amp Current Range!
• Super-compact design
• iGBT Inverter Technology
• Latest Super Stable DC Inverter Technology
• Arc Force - Current auto-increases if Arc length is too short
• Welds from 1.6mm to 2.5mm thickness
• Industry Standard DIN Sockets
• Ultra-Portable - Only 5.5kg
• EMC and C-Tick Approval, 1 YEAR WARRANTY

• 10 - 200 Amp Current Range!
• iGBT Inverter Technology
• Latest Super Stable DC Inverter Technology
• Arc Force - Current auto-increases if Arc length is too short
• Smoothly runs a wide range of rods - up to 4mm
• Welds from 1.5mm to 12mm thickness
• Industry Standard DIN Sockets
• Ultra-Portable - Only 4.5kg
• Genuine ROSSI Quality!
• EMC and C-Tick Approval, 1 YEAR WARRANTY

• 20 - 200 Amp current range
• Super-compact design
• iGBT inverter technology
• Pure copper Torodial Transformer
• Latest Super Stable DC Inverter Technology
• Welds from 1.5mm to 12mm thickness
• Industry standard DIN sockets 
• Automatic shutdown system prevents overload and overheating
• Ultra-portable and super-compact design
• Unique coating to prevent shock transfer
• Mask and accessories included
• RoHS and C-Tick Approval

• 20-180 Amp current range
• Super-compact design
• Semi-Zener inverter technology
• Pure copper Toroidal Transformer
• Welds from 1.5mm to 12mm thickness
• Industry standard DIN sockets 
• Automatic shutdown system prevents overload and overheating
• Ultra-portable and super-compact design
• Unique coating to prevent shock transfer
• Mask and accessories included
• RoHS and C-Tick Approval

• Unique combined Sander/Vacuum design for minimal cleaning up
• Extendable handle from 1100 to 1800mm for hard to reach areas such as ceilings
• Features a massive 1800 watts of power
• Exclusive variable 6 speed motor (1000 to 1800 rpm)
• Clever pivot head for comfortable sanding
• Ergonomic soft grip handle with integrated controls
• Removable lip to enable sanding in corners
• Includes 12 BONUS sanding discs
• 1 Year Warranty

• Powerful 6.5HP engine
• Superior 58kg power unit with huge 3.6L fuel tank
• 21 inch packer plate - cuts down working time
• 25m/min walking pace
• The ultimate construction partner for footings, excavations, trenches and just about anything that needs to be put in its place!
• Convenient fold-away wheels - save big on labour costs

• Unique combined Sander/Vacuum design for minimal cleaning up
• Features a massive 1800 watts of power
• Exclusive variable 6 speed motor (1500 to 3050 rpm)
• Large 225mm sanding diameter
• Ergonomic handles with integrated throttle with locking function
• Centered handles for right or left-handed operation
• Lightweight design at just 2.8kg
• Removable lip to enable sanding to the edge of walls
• Includes 12 BONUS sanding discs
• 1 Year Warranty

• Unique combined Sander/Vacuum design for minimal cleaning up
• Features a massive 1800 watts of power
• Exclusive variable 6 speed motor (1500 to 3050 rpm)
• Ergonomic handle with integrated throttle with locking function
• Caters for both right or left-handed operation
• Lightweight design at just 2.6kg
• Includes 12 BONUS sanding discs
• 1 Year Warranty

• Powerful full enclosed 800w motor cuts through tiles quickly and easily
• Ball-bearing guided rail for smooth operation
• Rip cuts up to a huge 720mm and diagonally cut up to 500x500mm tiles
• Adjustable pivoting rail allows for easy angle positioning from 45 to 90 degrees for fast and consistent miter cuts
• rugged, portable construction for use on any jobsite
• 8" continuous rim wet diamond blade
• Dual spray system with large removable reservoir and high-volume water pump
• Removable legs for easy transport (adjustable for uneven surfaces)
• Non-slip rubber deck with movable extension platform for supporting large tiles
• Ideal for contractors or those looking to save $1000’s in their next DIY project

• 30L volume
• 800w power
• Voltage: 240V~50Hz
• Standard Vacuum Cleaner Hose
• Vacuum Degree: >16Kpa
• Dual function both blowing and vacuum.
• Suitable for both wet and dry applications.
• Washable filter
• Waterproof power switch
• Inbuilt safety mechanism to protect motor.
• 4.3m Power cord

• PLEASE NOTE: For optimal performance when sanding + vacuuming, it's advised that you use a perforated sanding disc with a perforated velcro attachment on the disc sander. Both can be purchased online or at all good hardware stores.

• Large vents for consistent power output
• Uses HVLP technology
• 1.5m flexi-hose
• Convenient gun holder and integrated handle
• 1L spraying reservoir
• Adjustable spray gun
• Lightweight at just 2.5kg
• Included blowing connection
• Included viscosity metre

• Large vents for consistent power output
• Uses HVLP technology
• 1.6m flexi-hose
• 1L spraying reservoir
• Adjustable spray gun
• Lightweight at just 2kg
• Included blowing connection
• Included viscosity metre

• Ergonomic yet Powerful
• Forward and Reverse Drilling Function
• Ultra-Lightweight 1.4kg Unit
• 1800 RPM Power
• 90 PSI Air Pressure 
• Cleaner more Precise Drilling
• Minimal Maintenance 
• Less User Fatigue
• 3/8” Industrial Grade Chuck
• Detachable Auxiliary Handle
• Solid Steel Pistol Grip and Trigger

• The Genuine Baumr-AG Pro-Series
• Huge Torque - 45 Joules / 1400BPM
• Full 2400 Watts Force (Most Powerful On Market)
• Precision Stator Assembly
• Baumr's Famous Series II Vibe-FlexTM Rubber Hand Grip
• High Tensile Gear Set for Maximum Reliability
• Toughened Crankshaft, Ball Bearing Construction
• BONUS Tile Chipper and Moil Point Chisels
• Fast Adjusting Handle - Easy To Use At Any Angle
• BONUS Sturdy High impact Carry Case
• Full 12 months Warranty

• The Genuine Baumr-AG Pro-Series
• Class leading 1600BPM (Beats per Minute)
• Full 2200 Watts Force
• Precision Stator Assembly
• High Tensile Gear Set for Maximum Reliability
• Toughened Crankshaft, Ball Bearing Construction
• Low Vibration, Hardened Ram
• BONUS Tile Chipper, Moil Point and Grooving Chisels
• Fast adjusting handle - easy to use at any angle
• BONUS Sturdy High Impact Carry Case
• Full 12 months Warranty

• The Genuine Baumr-AG Pro-Series
• Class leading 1600BPM (Beats per Minute)
• Precision Stator Assembly
• High Tensile Gear Set for Maximum Reliability
• Toughened Crankshaft, Ball Bearing Construction
• Low Vibration, Hardened Ram
• BONUS Tile Chipper, Moil Point and Grooving Chisels
• Fast adjusting handle - easy to use at any angle
• BONUS Steel Carry Case and Safety Kit
• Full 12 months Warranty

• 12 Quality Unimac Drywall Sander Discs
• Hook & Loop Pad - Takes Seconds to Switch Sander Discs
• P240 Grit - Medium Level Sanding
• Ideal for Smoothing Out Depressions, Scratches or Rounding Sharp Corners

• 12 Quality Unimac Drywall Sander Discs
• Hook & Loop Pad - Takes Seconds to Switch Sander Discs
• P150 Grit - Fine Level Sanding
• Ideal for Sanding Bare Wood, Cleaning Plaster or Water Stains from Wood

• Powerful 600w motor
• Large reservoir and high-volume water pump
• Smooth quad ball-bearing guided rail
• Rip cut 400mm tiles
• Mitre cuts up to 300 x 300mm 
• Cuts standard depth tiles
• Quick adjusting pivoting rail
•  Rugged construction with removable legs for storage
• Non-slip rubber deck

• Genuine AUCH Brand - True-Blue Dust-free Series - Don't bite the dust with Inferior Products!
• Class Leading 800W Motor
• Adjustable Articulating Head for SUPERIOR Manoeuvrability
• Fast Variable Speeds at 1000-2500RPM
• Adjustable Length with extension tube (1.1m ~ 1.83m approx.)
• Brush Skirt to Prevent Scratching
• Rust-free Aluminium Pole Body
• Robust, Balanced Solid Construction
• Lightweight and Portable, only 5kg
• BONUS! 11 SANDER DISCS - 2X MORE THAN OTHERS!

• Original Baumr-AG
• Powerful 65CC and 9,000RPM
• Frequency inverter technology for high-precision 0.8mm amplitude
• Commercial 45mm hard-nose head
• Balanced working shaft
• Extra wide ergonomic handle
• Super-lightweight design
• Shoulder strap
• Patented quick-connect coupling for easy separation and cleaning
• Easy recoil start
• 1.2L fuel tank
• CE certification
• 12-month Australian warranty

• Powerful 10T continuous pressing force
• Suitable for professional and domestic workshops
• Remove and install bearings, gears, bushings, rods ball joints and much more
• High strength powder coated steel construction
• H-frame design
• Dual ram return tension springs
• Smooth and safe operation
• Four adjustable positions of the working table
• Press plates included
• Base plate with fixing holes

• Genuine trade quality
• Lifts 120cm to 335cm (11ft)
• Accepts Panel Sizes up to 122cm x 488cm, up to 68kg
• Cuts Labour Costs - Turn a 2 or 3 man job into an easy 1 man task
• Three 5” Heavy Duty Lockable Castors for Easy Maneuverability
• Assembles in Seconds - No Tools Required
• Built to Last Steel Powder Coated Construction
• Folds Up for Easy Transport

• 3-in-1 TIG, Stick and Pulse 
• AC/DC Welding capability
• Powerful 10-250 Amp current range
• Semi-ZenerTM iGBT inverter technology
• RapidPulseTM for clean welds
• Precise Digital Current Display
• Pure copper Toroidal Transformer
• Heavy-duty alloy foot pedal
• Industry standard DIN sockets 
• Automatic system prevents overload and overheating
• Portable design

• Powerful 1800w Motor in impact resistant housing
• Variable 6 speed finger-tip control dial prevents splashing at startup
• 2 gears that can be selected while the motor’s running
• Ergonomic handles with soft grip reduce fatigue
• Lightweight 6kg balanced dual grip design
• Quiet operation at just 7dB
• Ideal for job sites or home renovation use
• 1 Year Warranty

• Hitachi / Makita standard 30mm hexagonal tool coupling
• Extra wide square-tipped 135mm spade blade
• Super hardened to cope with rock and abrasive soils
• 435mm length for deep penetration
• Extra thick chisel head for a life time of resharpening.
• Suits all 30mm hex Baumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45 and more!
• BONUS! Carry case

• Hitachi / Makita Standard 30mm Hexagonal Tool Coupling
• Extra Wide 130mm Spade Blade
• Super Hardened to Cope With Rock And Abrasive Soils
• 435mm Length for Deep Penetration
• Extra Thick Chisel Head for a Life Time Of Resharpening.
• Suits All 30mm Hex Bäumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45 and more!

• Hitachi / Makita Standard 30mm Hexagonal Tool Coupling
• Super Hardened 35mm Blade
• 350mm Length for Deep Penetration
• Extra Long Chisel Head for a Life Time Of Resharpening.
• Suits All 30mm Hex Bäumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45, BMJK-24S and more!

• Hitachi / Makita Standard 30mm Hexagonal Tool Coupling
• Super Hardened 50mm Stake Cone
• 220mm Length for Deep Penetration
• Extra Long Chisel Head for a Life Time Of Resharpening
• Suits All 30mm Hex Baumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45 and more!

• Hitachi / Makita Standard 30mm Hexagonal Tool Coupling
• Extra-Wide Super Hardened 100mm Blade
• Extra Thick Chisel Head For Maximum Durability
• 405mm Length for Deep Penetration
• Extra Long Chisel Head for a Life Time Of Resharpening.
• Suits All 30mm Hex Bäumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45, BMJK-24S and more!

• Hitachi / Makita Standard Hexagonal Tool Coupling
• 130mm Wide Flexible Steel Chisel
• Suits All 30mm Hex Bäumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45 and more!

• 1450W Power
• Full Ball Bearing Gear System
• Feed Resistance Control
• Self-Centring Operation Lever
• Fluid Lubricant Nozzle
• Quality Steel Fixtures
• SAA Approved Safety
• Aus/NZ Standard Fittings
• User-Friendly Operation
• Ergonomic Design
• For use on:  Concrete, Poroton, Cellular Concrete, Ytong, Marble, Bricks, Tiles, Granite, Stoneware and various other Masonry and Concrete surfaces  

• Hitachi / Makita Standard 30mm Hexagonal Tool Coupling
• Super Hardened Moil Point
• 405mm Length for Deep Penetration
• Extra Long Chisel Head for a Life Time Of Resharpening.
• Suits All 30mm Hex Bäumr-AG, Hitachi PH65 PH65SA H65SB2 H70SA, Makita HM1303 HM1317C HM1307C HM1304 HR1400 HR1317C, ROK 150-36-551, TWM, Millers Falls PT4370, Z1G-DW-45, BMJK-24S and more!

• Powerful high-grade low-noise 350W motor
• High-tensile Steel Frame
• Max cutting width of 200mm and height of up to 80mm
• Micro-adjustable blade guard
• Tool-less tilt adjustment
• High-performance 1400mm blade
• Quick-lock fence clamp
• 0-45° angle adjustable table
• Full-sized table with ruler
• Rapid Blade Tension System
• Easy Blade Alignment
• Steering ‘Push’ Stick
• Dust Extraction Port

• Innovative 2-in-1 design
• 1100W pure copper motor and direct drive
• Fast, square clean cuts
• Slices metal tube, rods, pipe, steel plate and rebar
• 6 speed catering for other metals, wood, fiberglass, plastic & rubber
• Tough cast aluminium body with rugged rubbed edges
• Minimal fatigue 7kg design with adjustable front handle
• Accommodates workpieces of up to 127 x 127mm 
• Tool-free blade tensioner and swap out
• Guidance light for pencil markings
• Included benchtop stand for Cut-off saw functionality
• Quick-adjust vice clamp 
• Precise mitre cuts with onboard scale. 
• Zero sparks and immediately cool to touch workpieces
• Replacement blades readily available
• Ideal for automotive shops, site work and DIY

• Latest MIG/ MAG/ MMA technology
• MIG Switch ON/OFF
• 240V, using 15Amp plug
• Full 40-195amp - powerful solid state MIG
• Anti-stick technology - Welds steel, stainless steel, copper, iron + more
• Gas/ Gasless DC welder technology
• Variable on-the-fly wire feed
• Takes Up to 5kg spools from 0.6-0.8mm and 0.8-1.0mm
• 1 YEAR WARRANTY

• Superior Unimac quality
• 5 speed motor for ultimate control
• 7200SPM - Engrave metal with ease!
• Grippy, ergonomic handle
• Lightweight at just 350 grams
• Extra engraving tip included

• SEMI-ZENER inverter technology
• Genuine Rossi with latest MIG/MMA technology
• Full 50-280Amp - powerful solid State MIG
• Welds steel, stainless steel, copper, iron + more
• Gas/Gasless MIG Operation
• Variable On-the-fly Wire Feed
• Takes Up to 5Kgs Spools from 0.6 - 1.0mm
• Generator friendly, Ultra-portable and lightweight
• Overheat/Over current/Overload protective circuit
• EMC and C-Tick approval
• Intertek approval

• Slices through 4-16mm rebar
• Powerful 850W single phase motor
• Cuts rebar like butter
• Efficient 2.5 second cycle time
• Solid forged steel cutting head
• Industry leading 16 tonne drive unit
• Reinforced gearbox with direct drive
• Industrial-strength blade with solid 14 bolt head
• Ultra strong yet lightweight
• BONUS rugged carry case and tool set
• CE RoHS accredited

• Slices through 4-22mm rebar
• Powerful 950W single phase motor
• Cuts rebar like butter
• Efficient 3.5 second cycle time
• Solid forged steel cutting head
• Industry leading 20 tonne drive unit
• Reinforced gearbox with direct drive
• Industrial-strength blade with solid 14 bolt head
• Ultra strong yet lightweight
• BONUS rugged carry case and tool set
• CE RoHS accredited

• Slices through 4-16mm rebar
• Powerful 850W single phase motor
• Cuts rebar like butter
• Efficient 2.5 second cycle time
• Solid forged steel cutting head
• Industry leading 16 tonne drive unit
• Reinforced gearbox with direct drive
• Industrial-strength blade with solid 14 bolt head
• Ultra strong yet lightweight
• BONUS rugged carry case and tool set
• CE RoHS accredited

• Slices through 4-25mm rebar
• Powerful 1600W single phase motor
• Cuts rebar like butter
• Efficient 4.0 second cycle time
• Solid forged steel cutting head
• Industry leading 28 tonne drive unit
• Reinforced gearbox with direct drive
• Industrial-strength blade with solid 14 bolt head
• Ultra strong yet lightweight
• BONUS rugged metal carry case and tool set
• CE RoHS accredited

• Suitable for bending 4-16mm rebar
• Powerful 850W single phase motor
• Efficient 2.75 second cycle time
• Solid forged steel head
• Industry leading 13 tonne drive unit
• Reinforced gearbox with direct drive
• Ultra strong yet lightweight
• BONUS rugged carry case and tool set
• CE RoHS accredited

• Ultimate 3-in-1 Jackhammer, Hammer Drill, Drill
• SDS Plus - Securely Fasten Drill Bits In Seconds
• On-the-fly Variable Speed up to 4000bpm
• High Impact Construction with Metal Gear Casings
• Bonus Carbide Drill Bits, Chisels and BONUS 13mm Chuck
• Precision Copper Stator Assembly
• High Tensile Gear Set for Maximum Reliability
• 100% Compatible SDS Plus - Purchase Drill Bits Just About Anywhere
• Left and Right Hand Commercial Handle
• Full 12 months Warranty

• Latest TIG/MMA/CUT 3-in-1 Inverter Welder - The All in one Workshop
• Semi-Zener Inverter Technology
• Delivers 160A Tig - 160A ARC - 40A Plasma cutter welding range
• Super stable Pilot Arc control - Cuts through rust and paint
• Digital screen display
• Welds steel, stainless steel, copper, iron + more
• Generator friendly, ultra-portable and lightweight
• Overheat/Over current/Overload protective circuit
• Rossi quality and reliability
• EMC and C-Tick Approval

• Lightweight aluminium design
• Compacts to 89cm
• Extends incrementally
• 380cm straight ladder
• Folds to trestle ladder
• 120kg load-bearing capacity
• Stabiliser bar
• Rubber-tipped feet
• Velcro storage straps
• SGS Safety Certification

• The Genuine Pro-Series - 9,000rpm
• Superior UNIMAC quality
• Cuts all types of aluminium, plastics, fibreglass & sheet metal up to 2mm thick
• Lightweight versatile design
• Cuts curved surfaces tight circles with ease
• Adjustable blade guide increases blade life
• BONUS ACCESSORY PACK with extra blade

• Tough yet lightweight build - 1.3kg
• Standard 1/4" NPT fitting
• Hardened Steel Triple Blades
• Ergonomic design

• Heavy-duty powder coated steel unit
• Safe and easy work elevation
• Effortless single person assembly and height adjusting
• Pin loaded platform lock system
• 700mm - 1870 mm height
• Steel reinforced 1.45m2 wooden platform
• Fits through Australian standard doorways
• 127mm polyurethane lockable caster wheels
• Suitable for indoor and outdoor use
• Isolated height adjustment for levelling on uneven surfaces
• Work on slopes and stairs
• Spring loaded platform clamps
• Eight secure locking pins
• Slim and flat storage

• Solid pressed steel base
• Heavy-duty construction
• Powerful 2500W motor with 3900rpm
• Massive 110 x 130mm cutting capacity
• Thick 355mm cutting disc
• Vice for safely securing workpieces
• Capable of 45° mitre cuts
• Portable Design
• Large, adjustable spark guard
• Ergonomically designed handle with safety interlock
• Conveniently Pre-assembled